Doepfer

If we are discussing enhancements for the A-155 sequencer, I would like to
add some features
that I still really miss in this module:

1) skip on/off switch per sequence step (if on, the sequencer skips this
step and goes to the following directly)
2) the ability to use an (integrated?) clock/trigger with programmable pulse
width and/or programmable step timing, or alternatively a trigger delay
control per step

3) the ability to send out a trigger on more than one channel at once (i.e.
sending the trigger out to 1,2 and 3 at the same time
or a combination of these) 4) a third row of voltage controls would be nice
too

please note: if one of you doepfer-a100 users do know alternative ways or
module uses to get the features above,
I very much welcome their advice

thanks in advance

eric

----- Original Message -----
From: <Doepfer_a100@yahoogroups.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Monday, November 04, 2002 2:22 PM
Subject: [Doepfer_a100] New poll for Doepfer_a100


>
> Enter your vote today!  A new poll has been created for the
> Doepfer_a100 group:
>
> What features would you want doepfer to
> include in the new a155 seq controller
> module?(please note that the various
> running mode selection types are
> alternative,choise 1 to 6 exclude one
> another!
>
>   o manual control by a rotary switch for running mode selection
>   o manual control with up/down buttons for running mode selection
>   o manual control with up/down buttons, controlled with up/down inputs
(each pulse selects the next running mode) for running mode selection
>   o voltage controlled running mode selection
>   o separate clock inputs for clock forward and clock backward instead of
one of the selection modes above
>   o only one clock input and another (digital) input to select the
direction(up/down)
>   o in case of voltage controlled selection or selection with up/down
buttons or inputs,of the running mode,user memories for programming
different running mode orders
>   o in case of VC running mode selection,led display of the selected
running mode
>   o 2 different pendulum modes(like the maq16/3)
>   o integrated voltage controlled clock source
>
>
> To vote, please visit the following web page:
>
> http://groups.yahoo.com/group/Doepfer_a100/surveys?id=10958388
>
> Note: Please do not reply to this message. Poll votes are
> not collected via email. To vote, you must go to the Yahoo! Groups
> web site listed above.
>
> Thanks!
>
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>