Doepfer

hi eric,
the pwm for the vc clock source is something that i
want ,too...(maybe a pw knob and a pwm cv input with
attenuator?)
also the skip on/off switch is something that could be
added,too.
but the third cv row and the simultaneus trigger in
all four channels,or even three at once,would require
a totally new sequencer module,not just a new seq
controller board module.
bakis.




--- Quantum Productions <quantumproductions@planet.nl>
wrote:
> If we are discussing enhancements for the A-155
> sequencer, I would like to
> add some features
> that I still really miss in this module:
> 
> 1) skip on/off switch per sequence step (if on, the
> sequencer skips this
> step and goes to the following directly)
> 2) the ability to use an (integrated?) clock/trigger
> with programmable pulse
> width and/or programmable step timing, or
> alternatively a trigger delay
> control per step
> 
> 3) the ability to send out a trigger on more than
> one channel at once (i.e.
> sending the trigger out to 1,2 and 3 at the same
> time
> or a combination of these) 4) a third row of voltage
> controls would be nice
> too
> 
> please note: if one of you doepfer-a100 users do
> know alternative ways or
> module uses to get the features above,
> I very much welcome their advice
> 
> thanks in advance
> 
> eric
> 
> ----- Original Message -----
> From: <Doepfer_a100@yahoogroups.com>
> To: <Doepfer_a100@yahoogroups.com>
> Sent: Monday, November 04, 2002 2:22 PM
> Subject: [Doepfer_a100] New poll for Doepfer_a100
> 
> 
> >
> > Enter your vote today!  A new poll has been
> created for the
> > Doepfer_a100 group:
> >
> > What features would you want doepfer to
> > include in the new a155 seq controller
> > module?(please note that the various
> > running mode selection types are
> > alternative,choise 1 to 6 exclude one
> > another!
> >
> >   o manual control by a rotary switch for running
> mode selection
> >   o manual control with up/down buttons for
> running mode selection
> >   o manual control with up/down buttons,
> controlled with up/down inputs
> (each pulse selects the next running mode) for
> running mode selection
> >   o voltage controlled running mode selection
> >   o separate clock inputs for clock forward and
> clock backward instead of
> one of the selection modes above
> >   o only one clock input and another (digital)
> input to select the
> direction(up/down)
> >   o in case of voltage controlled selection or
> selection with up/down
> buttons or inputs,of the running mode,user memories
> for programming
> different running mode orders
> >   o in case of VC running mode selection,led
> display of the selected
> running mode
> >   o 2 different pendulum modes(like the maq16/3)
> >   o integrated voltage controlled clock source
> >
> >
> > To vote, please visit the following web page:
> >
> >
>
http://groups.yahoo.com/group/Doepfer_a100/surveys?id=10958388
> >
> > Note: Please do not reply to this message. Poll
> votes are
> > not collected via email. To vote, you must go to
> the Yahoo! Groups
> > web site listed above.
> >
> > Thanks!
> >
> >
> >
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > doepfer_a100-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> 
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/