Doepfer

--- In Doepfer_a100@y..., Florian Anwander <Florian.Anwander@c...> 
wrote:
> Hi ringmod45 
> 
> > my suggestion is to have 8 horizontal led's which indicate the
> > direction the sequencer will follow. here are the possibilites
> Nice Idea but costy, since you have to setup the complete clock and 
address
> generation a second time only for the LEDs.

hi Florian, 

i hear you on that call, but all you are adding is 4 extra led's plus 
the complete clock and address generation. I am sure Doepfer could 
this make possible with some craftiness. look at the photoshop A154 
file in the files section. it's pretty ugly work, but you get the 
jist of it. the led's should be spaced a little further apart. if the 
cost to implement the led's is another 10 Euros , i say "GO FOR IT" 
it will be a whole better thatn the 4 led's sitting idle.

let me know what you think, thanks.

Cheers,
RM


> 
> 
> > would provide a cool light show as well. 
> > hint blue led's. 
> :-))
> 
> > Two 10 pin connectors  on on the back so you can have a VC analog
> > selection for 2 sequencers to have 16 steps. you could have a 
switch
> > to tie both the sequencers together or have them work separately 
from
> > the vc clock.
> The whole stuff might be stackable... 
> 
> 
> Florian
> -- 
> Florian Anwander                  |ConSol*  HP-Support
> Tel.   +49.89.45841-133           |Consulting&Solutions Software 
GmbH
> Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 
München
> email: florian.anwander@c... |http://www.consol.de