Doepfer

hi David, the best way to implement this feature to a double pole 
single throw switch , i believe. switch it to the top and both 
sequencers are addressable in parallel to the vc clock. middle 
position disables the function. the bottom position addresses the 
sequencers in series. i think this makes it simple to execute.

regards,
RM



--- In Doepfer_a100@y..., David Salter <david.salter@r...> wrote:
> Really good suggestions.
>  
> I was surprised not to see PWM on the mock-up.
>  
> The idea to run two a155's is very good, although I would want to be
> able to switch the 154 out so I can use one of the 155's as normal.
> Tricky one that I expect.
>  
>  
>  
>  
> 
> David Salter 
> Reuters Consulting 
> Tel: +44 20 7542 2402 
> Mob: +44 7990562402 
> Fax: +44 20 7542 2699 
> 
> 	-----Original Message-----
> 	From: ringmod45 [mailto:ringmod45@y...] 
> 	Sent: 08 November 2002 08:57
> 	To: Doepfer_a100@y...
> 	Subject: [Doepfer_a100] Re: ok group,CHECK THIS OUT!!!!!!!!
(A154
> SEQUENCERCONTROLLER.)
> 	
> 	
> 	
> 	hi Bakis. the module looks good , but i see the need for a 
few 
> 	adjustments. the 4 led's to tell which direction it is moving
> in, is 
> 	very confusing, especially in a live context with dim lights.
> 	
> 	my suggestion is to have 8 horizontal led's which indicate 
the 
> 	direction the sequencer will follow. here are the possibilites
> 	
> 	chasing one another to the right for forward movement
> 	chasing one another to the left for reverse movement
> 	chasing one another to the right then back to the left for
> pendulum 
> 	mode 1 and flashing the last leds twice for pendulum mode 2 
> 	random is just what it means a random diplay of its position.
> 	
> 	the plus side to this is its cheap and would provide a cool
> light 
> 	show as well. hint blue led's. also you could have the VC 
Clock
> cycle 
> 	the led's in time like the A145, 146 and 147 lfo's.
> 	
> 	the voltage controlled clock should  have a variable pulse 
width
> with 
> 	an input and manual pot.
> 	
> 	you could also add a reference envelope output for every stage
> like 
> 	the A142 which is basically a linear decay envelope to to do
> short 
> 	percussive sounds , this would save your envelopes for more
> creative 
> 	modulations.
> 	
> 	here is the Feature i crave the most!!
> 	
> 	Two 10 pin connectors  on on the back so you can have a VC
> analog 
> 	selection for 2 sequencers to have 16 steps. you could have a
> switch 
> 	to tie both the sequencers together or have them work 
separately
> from 
> 	the vc clock.
> 	
> 	in the files section under proposed A154, i have done a 
shityy 
> 	photoshop version with the suggested features.
> 	
> 	RM 
> 	
> 	
> 	
> 	
> 	
> 	
> 	
> 	--- In Doepfer_a100@y..., bakis Sirros <synth_freak_2000@y...>
> wrote:
> 	> hi list,
> 	> here is the hidden link:
> 	> http://www.doepfer.de/a154.htm
> 	> 
> 	> OPINIONS,THOUGHTS................????
> 	> bakis.
> 	> 
> 	> 
> 	> 
> 	> 
> 	> =====
> 	> synthfreak(parallel worlds)
> 	> athens-greece
> 	> [Doepfer_a100] group owner-moderator
> 	> 
> 	> __________________________________________________
> 	> Do you Yahoo!?
> 	> U2 on LAUNCH - Exclusive greatest hits videos
> 	> http://launch.yahoo.com/u2
> 	
> 	
> 	To unsubscribe from this group, send an email to:
> 	doepfer_a100-unsubscribe@y...
> 	
> 	
> 	
> 	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> . 
> 	
> 
> 
> 
> ------------------------------------------------------------- ---
>         Visit our Internet site at http://www.reuters.com
> 
> Get closer to the financial markets with Reuters Messaging - for 
more
> information and to register, visit http://www.reuters.com/messaging
> 
> Any views expressed in this message are those of  the  individual
> sender,  except  where  the sender specifically states them to be
> the views of Reuters Ltd.
> 
> 
> [Non-text portions of this message have been removed]