Re: ok group,CHECK THIS OUT!!!!!!!!(A154 SEQUENCERCONTROLLER.)
2002-11-08 by ringmod45
hi David, the best way to implement this feature to a double pole single throw switch , i believe. switch it to the top and both sequencers are addressable in parallel to the vc clock. middle position disables the function. the bottom position addresses the sequencers in series. i think this makes it simple to execute. regards, RM --- In Doepfer_a100@y..., David Salter <david.salter@r...> wrote: > Really good suggestions. > > I was surprised not to see PWM on the mock-up. > > The idea to run two a155's is very good, although I would want to be > able to switch the 154 out so I can use one of the 155's as normal. > Tricky one that I expect. > > > > > > David Salter > Reuters Consulting > Tel: +44 20 7542 2402 > Mob: +44 7990562402 > Fax: +44 20 7542 2699 > > -----Original Message----- > From: ringmod45 [mailto:ringmod45@y...] > Sent: 08 November 2002 08:57 > To: Doepfer_a100@y... > Subject: [Doepfer_a100] Re: ok group,CHECK THIS OUT!!!!!!!! (A154 > SEQUENCERCONTROLLER.) > > > > hi Bakis. the module looks good , but i see the need for a few > adjustments. the 4 led's to tell which direction it is moving > in, is > very confusing, especially in a live context with dim lights. > > my suggestion is to have 8 horizontal led's which indicate the > direction the sequencer will follow. here are the possibilites > > chasing one another to the right for forward movement > chasing one another to the left for reverse movement > chasing one another to the right then back to the left for > pendulum > mode 1 and flashing the last leds twice for pendulum mode 2 > random is just what it means a random diplay of its position. > > the plus side to this is its cheap and would provide a cool > light > show as well. hint blue led's. also you could have the VC Clock > cycle > the led's in time like the A145, 146 and 147 lfo's. > > the voltage controlled clock should have a variable pulse width > with > an input and manual pot. > > you could also add a reference envelope output for every stage > like > the A142 which is basically a linear decay envelope to to do > short > percussive sounds , this would save your envelopes for more > creative > modulations. > > here is the Feature i crave the most!! > > Two 10 pin connectors on on the back so you can have a VC > analog > selection for 2 sequencers to have 16 steps. you could have a > switch > to tie both the sequencers together or have them work separately > from > the vc clock. > > in the files section under proposed A154, i have done a shityy > photoshop version with the suggested features. > > RM > > > > > > > > --- In Doepfer_a100@y..., bakis Sirros <synth_freak_2000@y...> > wrote: > > hi list, > > here is the hidden link: > > http://www.doepfer.de/a154.htm > > > > OPINIONS,THOUGHTS................???? > > bakis. > > > > > > > > > > ===== > > synthfreak(parallel worlds) > > athens-greece > > [Doepfer_a100] group owner-moderator > > > > __________________________________________________ > > Do you Yahoo!? > > U2 on LAUNCH - Exclusive greatest hits videos > > http://launch.yahoo.com/u2 > > > To unsubscribe from this group, send an email to: > doepfer_a100-unsubscribe@y... > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/> . > > > > > ------------------------------------------------------------- --- > Visit our Internet site at http://www.reuters.com > > Get closer to the financial markets with Reuters Messaging - for more
Show quoted textHide quoted text
> information and to register, visit http://www.reuters.com/messaging > > Any views expressed in this message are those of the individual > sender, except where the sender specifically states them to be > the views of Reuters Ltd. > > > [Non-text portions of this message have been removed]