hello list, i must say that i prefer it,to work this way.it,' better to be able to change the random out according to the blue and red knobs. synthfreak --- Richard Guido <rguido@tibcofinance.com> wrote: > So, it seems that the A118 as shipped from Doepfer > works differently from > what the documentation says and differently from a > logical perspective of > how it is labeled. My question is this -- why don't > they configure it > "right" in the first place? I don't want to have > the modify a product to > work properly AFTER I buy it. > > -----Original Message----- > From: studio1dk [mailto:keld.soerensen1@skolekom.dk] > Sent: Tuesday, December 11, 2001 9:20 AM > To: Doepfer_a100@yahoogroups.com > Subject: [Doepfer_a100] Re: Is my A-118 > malfunctioning? > > > This was the mail I recived from Dieter Doepfer on > the subject: > > That's normal as the random output is derived from > the colored noise > (factory setting). It is possible to derive the > random output from > the white noise so that the red and blue pots do not > influence the > random output. For this the resistor R12 (100k) has > to be removed > and soldered to the position R12' (with apostrophe). > The position of > R12' is next to R12 and marked with a broken line > (behind the random > rate potentiometer). > > Best regards > Dieter Doepfer > Doepfer Musikelektronik GmbH > http://www.doepfer.de > email: hardware@doepfer.de > > > --- In Doepfer_a100@y..., Richard Guido > <rguido@t...> wrote: > > Ok, let's put this into perspective! Here's how > the thing should > work, if it > > doesn't work this way there's a design flaw or > something. First, > White noise > > out, no variation when any of the knobs are > turned. Second, > colored noise > > out is controlled by the blue and red knobs - > these should ONLY > affect the > > output of the colored noise. Third, random output > is controlled by > the rate > > and level knobs and ONLY those knobs! So, is this > what happens? > If not, > > the damn thing wasn't designed right. > > > > RJG > > > > -----Original Message----- > > From: studio1dk [mailto:keld.soerensen1@s...] > > Sent: Tuesday, December 11, 2001 7:20 AM > > To: Doepfer_a100@y... > > Subject: Re: [Doepfer_a100] Is my A-118 > malfunctioning? > > > > > > Dieter just wrote to me that it is normal -it�s > supposed to work > that > > way. You can disconnect the colored noise and > connect the white > noise > > if you want to. Thereby eliminating the influence > of the red and > blue > > pot. > > > > Keld > > --- In Doepfer_a100@y..., "martin olson" > <martin@t...> wrote: > > > > > > I�ve also noticed this phenomena, i thought it > was a malfunction > > when i first tried it, but even stranger is that > the rate pot. > seems > > to be working in the opposite direction...?.. > > > > > > ///dnfn\\\ > > > > > > > > > > Doepfer_a100@y... davevosh@a...: Sat, 8 Dec > 2001 18:23:51 EST > > > > Re: [Doepfer_a100] Is my A-118 > malfunctioning?Reply-To: > > Doepfer_a100@y... > > > > > > > >In a message dated 12/8/2001 5:17:56 PM Eastern > Standard Time, > > > >keld.soerensen1@s... writes: > > > > > > > > > > > >> I was looking at the output of the random > output from the A- > 118 > > noise > > > >> module on an oscilloscope as I noticed that > turningthe "red > pot" > > had > > > >> an effect on the waveform. Is this supposed > to happen? -I > > thought > > > >> that the random out was independent from the > other two outs. > > > >> > > > > > > > > > > > > > > > >keld, > > > >it points out somewhere in the "man pages" for > the module that > the > > noise > > > >level controls interact with the r.v. output. > > > >best, > > > >dave > > > > > > > > > > > > > > > > > > > >[Non-text portions of this message have been > removed] > > > > > > > > > > > > > > > >To unsubscribe from this group, send an email > to: > > > >doepfer_a100-unsubscribe@y... > > > > > > > > > > > > > > > >Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > > > > > > > ------------------------------------------------------------ > > > wood. fire. hand. go. > http://www.bullseyeart.com > > > > > > > > To unsubscribe from this group, send an email to: > > doepfer_a100-unsubscribe@y... > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > To unsubscribe from this group, send an email to: > doepfer_a100-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner-moderator __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com
Message
RE: [Doepfer_a100] Re: Is my A-118 malfunctioning?
2001-12-11 by bakis Sirros
Attachments
- No local attachments were found for this message.