Doepfer

> if you use the A190 clock out as the source for the A154 shouldn't 
> this give midi sync.

My understanding of the proposed A154 is that the clock generator has 
two CV inputs, to control the clock rate and PW. I didn't see a clock 
input socket. So its the same as using an A147 as a clock generator 
for variable step length, or an A110 for PWM as well. Neither allow 
you to connect the A190 clock out as a source.
 
> here is one issue i would like to know further about. if you are 
> using a midi sequencer as you master and you use the A190 to drive 
> the A154 or A155, how would it start the A154 and or A155's? in 
sync?

According to the description on the Doepfer hidden page, the control 
sockets on the A155 will continue to work as usual. So, you patch the 
RESET output of the A190 to the RESET jack on the A155, as currently.


Joe