Doepfer

Thanks, I would rather not use it in the a-100 system but I wanted to use a couple of A-180-2's as a mini patchbay in my Doepfer-rack to connect some FX, so desolder the circuit boards so I was hoping they were stereo. I hope you understand. 
Thanks, regards, 


------------------------------------------------------ 
Danny Budts 
info@syndromeda.be 
www.syndromeda.be 


----- Oorspronkelijk bericht -----

Van: "Florian Anwander fanwander@mnet-online.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> 
Aan: "Doepfer a100" <Doepfer_a100@yahoogroups.com> 
Verzonden: Dinsdag 7 oktober 2014 15:40:31 
Onderwerp: Re: [Doepfer_a100] Sockets A-180-2 



And it is important: The doepfer sockets rely on that you are using a 
cable with a mono plug! 

Simply hold a stereo plug aside a doepfer socket and you will see, that 
the ground connector of the Doepfer socket contacts the shaft of the 
plug where the ring of a stereo plug is located: 

see http://fa.utfs.org/diy/a100/doepfer_socket_jack.jpg 

This does not matter for mono cables. But if you will connect such a 
stereo cable with a socket, that picks the ground from the real shaft 
position, then the ground will be missing in this connection. 

Florian 

On 07.10.14 15:02 , Kai Niggemann logiclist@kainiggemann.com 
[Doepfer_a100] wrote: 
> Mono. 
> On 07.10.2014, at 14:56, "syndromeda@telenet.be wrote: 
>> Does anybody knows if the sockets used on the Multiple A-180-2 are 
>> mono or stereo?