Doepfer

nope wrong,joe...
the control section of the a155 is disambled when you
use the a154 to control the a155.also,you HAVE a clock
input on the a154.just take a better look.
bakis.



--- Joe Buechler <buechlerjoe@toadmail.com> wrote:
> > if you use the A190 clock out as the source for
> the A154 shouldn't 
> > this give midi sync.
> 
> My understanding of the proposed A154 is that the
> clock generator has 
> two CV inputs, to control the clock rate and PW. I
> didn't see a clock 
> input socket. So its the same as using an A147 as a
> clock generator 
> for variable step length, or an A110 for PWM as
> well. Neither allow 
> you to connect the A190 clock out as a source.
>  
> > here is one issue i would like to know further
> about. if you are 
> > using a midi sequencer as you master and you use
> the A190 to drive 
> > the A154 or A155, how would it start the A154 and
> or A155's? in 
> sync?
> 
> According to the description on the Doepfer hidden
> page, the control 
> sockets on the A155 will continue to work as usual.
> So, you patch the 
> RESET output of the A190 to the RESET jack on the
> A155, as currently.
> 
> 
> Joe
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2