Doepfer

Hmmm, right you are.

So if I understand you correctly, an A190 can be connected to both 
step in and reset. In that case, what effect does the clock out jack 
have? 

Do the two CV inputs and pots still work? That is, do I still have 
variable step length and variable pulse width when the A190 clock is 
patched to the Step In jack? That's what I want.

Joe

--- In Doepfer_a100@y..., bakis Sirros <synth_freak_2000@y...> wrote:
> nope wrong,joe...
> the control section of the a155 is disambled when you
> use the a154 to control the a155.also,you HAVE a clock
> input on the a154.just take a better look.
> bakis.
> 
> 
> 
> --- Joe Buechler <buechlerjoe@t...> wrote:
> > > if you use the A190 clock out as the source for
> > the A154 shouldn't 
> > > this give midi sync.
> > 
> > My understanding of the proposed A154 is that the
> > clock generator has 
> > two CV inputs, to control the clock rate and PW. I
> > didn't see a clock 
> > input socket. So its the same as using an A147 as a
> > clock generator 
> > for variable step length, or an A110 for PWM as
> > well. Neither allow 
> > you to connect the A190 clock out as a source.
> >  
> > > here is one issue i would like to know further
> > about. if you are 
> > > using a midi sequencer as you master and you use
> > the A190 to drive 
> > > the A154 or A155, how would it start the A154 and
> > or A155's? in 
> > sync?
> > 
> > According to the description on the Doepfer hidden
> > page, the control 
> > sockets on the A155 will continue to work as usual.
> > So, you patch the 
> > RESET output of the A190 to the RESET jack on the
> > A155, as currently.
> > 
> > 
> > Joe
> > 
> > 
> 
> 
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
> 
> __________________________________________________
> Do you Yahoo!?
> U2 on LAUNCH - Exclusive greatest hits videos
> http://launch.yahoo.com/u2