Doepfer

As previously suggested, I recommend using a S&H module and an LFO or other programmed trigger source to control the rate of change if the A118 isn't performing as you need it to.  The Red and Blue controls can offset and limit the range of available voltages if necessary. 

I can't currently report how my A-118 performs. Can't get in my studio. 

Nick

Sent from my bl**dy crutches 

> On Oct 28, 2014, at 5:49 PM, "David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
> 
> On my A118 with rate at the lowest setting the pos beg lights change still visa let fast and sound fast. Slew limiter makes little dif at that rate
> 
> David
> 
> www.movingisliving.co.uk
> 
> Sent from my iPhone 
> 
>> On 28 Oct 2014, at 17:05, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>>  
>> A slew limiter seems like the best way to obtain what you're after. 
>> I assume you read the manual. I hope you're not offended by the following questions:
>> did you turn the rate knob on the A118 totally to the right? > this slows the rate down
>> And played around with the colour-knobs? Turning the 'red' knob down reduces big chances of the voltage.
>> 
>> Ernst
>> 
>>> On Tue, Oct 28, 2014 at 2:50 PM, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>>  
>>> Hi,
>>> 
>>> I need to have slow changing random voltages. I have the A 118 but the rate of change is very fast. I would like something that moves very much slower. I'm thinking of a VCLFO who's rate is changed by a random source - but this will still have an abruptness that I would rather not have. 
>>> 
>>> Any ideas?
>>> 
>>> David
>>> 
>>> www.movingisliving.co.uk
>>> 
>>> Sent from my iPhone
>>> 
> 
>