Doepfer

I only have one and I'm still too comfortable under the covers to go an check, but couldn't you test this with just one?  Flip to 9/16 and adjust last step.  If it shortens the pattern, then I suppose it does not work as you hoped.  In that case, consider an MAQ16/3, but then such changes to the sequence cannot be made with CV (unless you have CVtoMIDI)

Nick

Sent from the future

> On Nov 28, 2014, at 4:32 AM, "sj230962@gmail.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
> 
> Hi all - did a quick search through the old topics but couldn't find an answer to my question, so here goes...
> 
> 
> 
> How does the First/Last step controller work when 2x155s are in series, linked by the A150 VCS ?
> 
> 
> 
> When the 9/16 switch is flipped, does the last step output automatically have 8 added to it so it addresses steps 9-16 on the second A155 ?      
> 
> 
> 
> Example, I want to run random seq/pendulum etc between steps 3-13 :  can I do this ?
> 
> 
> 
> Reason for asking is that my 2nd A155 is in the post today and I wanted to think about this issue before it arrives.
> 
> 
> 
> Appreciate any advice
> 
> Steve
> 
> 
> 
> 
> 
>