Doepfer

Thanks for this Nick.  I’ll go and do that right now!  Funny how the simple things evade me.

As for the 16/3..I have one.  And a Schaltwerk.  But looking to sell both in the coming weeks - just simply run out of room living abroad here in Malaysia. Small apartment and lots of gear (plus wife) doesn’t always compute :-)

> On Nov 28, 2014, at 8:27 PM, Nicholas Keller maq163x2@gmail.com <mailto:maq163x2@gmail.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> 
> 
> I only have one and I'm still too comfortable under the covers to go an check, but couldn't you test this with just one?  Flip to 9/16 and adjust last step.  If it shortens the pattern, then I suppose it does not work as you hoped.  In that case, consider an MAQ16/3, but then such changes to the sequence cannot be made with CV (unless you have CVtoMIDI)
> 
> Nick
> 
> Sent from the future
> 
> On Nov 28, 2014, at 4:32 AM, "sj230962@gmail.com <mailto:sj230962@gmail.com> [Doepfer_a100]" <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> 
>>  
>> 
>> Hi all - did a quick search through the old topics but couldn't find an answer to my question, so here goes...
>> 
>> 
>> 
>> How does the First/Last step controller work when 2x155s are in series, linked by the A150 VCS ?
>> 
>> 
>> 
>> When the 9/16 switch is flipped, does the last step output automatically have 8 added to it so it addresses steps 9-16 on the second A155 ?      
>> 
>> 
>> 
>> Example, I want to run random seq/pendulum etc between steps 3-13 :  can I do this ?
>> 
>> 
>> 
>> Reason for asking is that my 2nd A155 is in the post today and I wanted to think about this issue before it arrives.
>> 
>> 
>> 
>> Appreciate any advice
>> 
>> Steve
>> 
>> 
>> 
>> 
>> 
>> 
> 
>