Doepfer

> Does the A165 work as a Eurorack to "S" trig converter? I was wondering about triggering a Korg SQ10 sequencer.
>
>
> David
>
> www.movingisliving.co.uk

The possible use of the A-165 as S trigger converter depends upon the direction:

If you have an S-Trigger signal that has to be converted into a voltage trigger a pull-up resistor has to be added. The procedure is
described  on the A-100 DIY page on our website.

If a voltage trigger has to be converted into a "real" S trigger (i.e. pure switching to GND) another modification is necessary: one
has to remove R2 and use the collector output of Q1 as S trigger output. But in many cases not a "real" S trigger is required but
only the inverted signal. In this case simply use the inverted output of the module. I'd try out if this works before you start the
modification.

Best wishes
Dieter Doepfer