Doepfer

Thanks Dieter. I shall try it out and see if my SQ10 likes it :-)

David

www.movingisliving.co.uk

Sent from my iPhone 

On 7 Jan 2015, at 10:31, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:

>> Does the A165 work as a Eurorack to "S" trig converter? I was wondering about triggering a Korg SQ10 sequencer.
>> 
>> 
>> David
>> 
>> www.movingisliving.co.uk
> 
> The possible use of the A-165 as S trigger converter depends upon the direction:
> 
> If you have an S-Trigger signal that has to be converted into a voltage trigger a pull-up resistor has to be added. The procedure is
> described  on the A-100 DIY page on our website.
> 
> If a voltage trigger has to be converted into a "real" S trigger (i.e. pure switching to GND) another modification is necessary: one
> has to remove R2 and use the collector output of Q1 as S trigger output. But in many cases not a "real" S trigger is required but
> only the inverted signal. In this case simply use the inverted output of the module. I'd try out if this works before you start the
> modification.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> 
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>