Doepfer

Thanks Dieter. I'll check the FAQs later,

David

www.movingisliving.co.uk

Sent from my iPhone 

> On 8 Jun 2015, at 09:01, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> > I'm having a bit of difficulty with a second hand A198. I have it set up with a very simple patch and can get the pitch
> > to behave as I think it should however the pressure seems to need a lot of pressure to activate and also seems not to
> > work at the end furthest from the connector in the same way as from about 10cm from the non connector end. It seems to be
> > very hard to trigger the pressure at all from that end. Along the whole length the amount of force needed to create a
> > pressure voltage or gate is such that you cannot wobble your finger - to create vibrato without loosing all pressure
> > signal. Is this correct behavior?
> >
> > David
> 
> The new manuals should not behave that way. But the A-198 manual design has been changed 10 years ago (2005). Maybe you purchased
> the old version where the pressure sensor was much less sensitive. For details please look at the FAQ page of our website -> R2M
> 
> Best wishes
> Dieter Doepfer
> 
>