Doepfer

Alas, Christian says that it is currently an unsolved problem. Hmm… It’s early for me still, I haven’t had enough coffee and I am not near the unit. So an external clock will solve the problem and a A-160-5 will want the external clock anyway, correct? Do I run into any problem if I still have the A-154 connected to the A-155 but am clocking it with an external clock (4MS QCD for example) parsed through a A-160-5? 

I do very much appreciate the system you built, Dieter, and the fact that we can reach you through this group. 

Best,

Kazys
> On Jun 8, 2015, at 5:37 AM, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
>> Same here, I’ve got used to it but is annoying!!!
>> 
>> 
>> Neil
>> 
>> 
>> On 7 Jun 2015, at 17:46, Kazys Varnelis kvarnelis@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>> 
>> I have the A-154/A-155 sequencer and controller. It seems to me that something is off in the clock knob. Perhaps its just
>> a logarithmic or exponential slope but until around 2pm on the knob, the increment to the clock proceeds very slowly. At
>> that point, there is a huge jump and afterwards it moves very fast. This makes the combo very difficult for me to use as
>> is. Any thoughts?
> 
> Please contact Christian Assall (software@doepfer.de). He programmed the A-154 firmware. I'm sure there is a solution for this
> problem.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>