Doepfer

> Thank you, Florian!
>
> >> I'm running the pitch CV through an A-185-1 first, so buffering hopefully shouldn't be an issue.
>
> > If I understand the comment on the http://www.doepfer.de/a171.htm (yes,
> > this one! Not the 1712.htm) right, then the buffer must be AFTER the
> > slewlimiter (=at the output), not before/at the input.
>
> You're right, thanks!  I'll try them in that order.
>
> > Also it looks to me, that the A-172-2 is not really intended for the
> > usage with a VCO.
>
> Do you (or does anyone else for that matter) know if the A-170 or A-171 is more designed for slewing pitch CVs in
> particular than the A-172-2? That paragraph you quoted suggests that either of those two should be fine for what I'm
> trying to do, but if anyone could verify this before I buy another slew module, I'd appreciate it!
>
> Thanks!
> Zoë.

For portamento applications (pitch CV slew limiting) I'd recommend the upper section of the A-170. It has been optimized for this
job. It has e.g. no serial output resistor to avoid any voltage losses. The A-171-2 has a lot of cool features but precise slew
limiting for pitch CV is not among these.

Best wishes
Dieter Doepfer