Doepfer

That's a good idea. As already mentioned most of the pcb will be the level
shifter's/buffers at the in/outputs and the LED displays.
Dieter

  Hello Dieter,

  > I could add something like 1/2 A-165 and 1/2 A-166.
  I think instead of the  1/2 A-165, you might use the function that
provides Start-Trigger and Stop-Trigger on separate sockets. Both the
A-154/A-155 and the A-157 are based on these separated triggers.
  On the other hand no patch comes to my mind, where I use the on-trigger
and off-trigger on the same line. I always have to split them up like
described.

  > What I also wanted to have is an RS flip-flop (a digital circuit > with
a set and reset input, a trigger signal at the set input causes > the output
to turn high, a trigger signal at the reset input causes > the output to
turn low). I often miss this function in my setup.
  What about a D-type flip-flop with switching sockets in front of the R and
S inputs?

  like this (leaving away buffering/leveling circuitry):


  Florian





  


[Non-text portions of this message have been removed]