Doepfer

....and for just to be (in)sure(d)...

I replaced the psu2 for a psu3
There is really nothing to it, 15 minutes work. 
Only the 5V wire is a piece I'll have to get at work. 
But don't need it with the todays setup. 
With 2000mA of power under the hood I feel a lot better.

Almost finished, just have to measure the voltages. 

 
And then ...." fill it up George". 
A small drone station 


Cheers

Jacco Ville


Verstuurd vanaf mijn iPhone SE Lunatik 

> Op 15 jul. 2016 om 10:05 heeft jaccoville@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
> 
> Hello there,
> 
> Besides my big system I am building a small setup targeted for dronelike sounds. 
> With a Doepfer A-100LC9 Low Cost case 9HE incl. A-100PSU2 still unused I filled it with Doepfer modules (ofcourse).
> With a calculation for powersurge I came to 960mA. 
> Now I know that the psu2 is good for 1200mA but there are two A110 VCOs and two A143-4 units. 
> I know that these 10 VCOs have Tempco.
> When warming up is my powersupply on the safe side?
> What reserve does the psu2 have?
> 
> Best regards
> 
> Jacco Ville
>