Doepfer

Solved! 

Just a small breath at P6 and....perfect. 

Nice weekend....where ever you are 

Jacco Ville

Verstuurd vanaf mijn iPhone SE Lunatik 

> Op 28 jul. 2016 om 16:18 heeft jaccoville@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
> 
> Hi there everyone,
> 
> While assembling and testing my (all Doepfer!) drone station I noticed that one of the vco's tuning pots on front didn't match center postion when tuned to C and rangeknob at zero. 
> All my other A110's do match quite well but this one sits around 7 on the front dial. 
> I want to correct this so that I instantly see which vco is high or low tuned. 
> Now the online service manual says something about P5 trimming with the tune pot centered. 
> Is it save to do that for a newby?
> Like putting the vco sine output to a chromatic tuner,set tune pot at front centered and then turn the P5 until a got a "C" reading?
> 
> Best regards (again)
> 
> Jacco Ville
> The Netherlands
> 
>