Doepfer

Hello,

the value of R5 defines the range of the tune control. You find details in
the service manual for the A-110-1 on our website:

www.doepfer.com > English > PRODUCTS > A-100 > Module Overview > A-110-1 >
service manual

It's also possible to replace R5 by a combination of a fixed resistor and a
trimming potentiometer. That way it's possible to adjust the desired tune
range.

Best wishes
Dieter Doepfer


Because of the Superbooth exhibition in Berlin I'm not in the company from
April 19-23, 2017.

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Dienstag, 18. April 2017 09:29
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] help with A-110 VCO tune mod
>
>
> Hi! i wonder if you could kindly help me with this:
> i need to make the tune mod to one of my two A-110VCOs, so i can
> tune them on intervals. as i don't have any electronic
> experience, a friend offered to do it for me, but since he knows
> nothing about synths he asked me for accurate instructions of
> exactly what to do. i searched for all possible info, and, while
> it's clear that the R5 resistor has to be replaced, there are
> many different suggestions about the value of the replacement
> resistor. Perhaps this may have to do with the different versions
> of A-110, so i should note that, mine are both the early version
> with only +/-1semitone range. I would very much appreciate if you
> could give me the right instructions of what value of resistor to install.
> Thank you very much.
>