Doepfer

I ask you to contact Christian Assall (software@doepfer.de) directly if you
find a bug in the Dark Time firmware.

Thank you
Dieter Doepfe


> can't confirm these, but i have noticed an autosave bug in my
> Dark Time re: midi channel.
>
>
> i was using it in 1-16 (single row) mode on channel 2 for a
> bassline, and once in a very rare while after first turning it on
> the second half of the bassline would diappear, and upon
> investigating i found that row 2 had reverted back to default
> channel 1 (row 1 remained on ch 2 like it should). it only
> happened at initial startup (and it was only an extra 5 seconds
> to reset it when it did), but it is a "consistently random" bug i
> noticed. (not sure what firmware mine is; have to crack it open to look)
>
>
> just my two farthings contribution!
>
>
> -chris  :-)
>
>
>
>
>
>
>
> From: "karelvanbezooijen@yahoo.com [Doepfer_a100]"
> <Doepfer_a100@yahoogroups.com>
> To: Doepfer_a100@yahoogroups.com
> Sent: Friday, April 28, 2017 9:31 PM
> Subject: [Doepfer_a100] Dark Time issue.
>
>
>
>
> I contacted the software division of Doepfer this morning but
> maybe someone can confirm this.
>
>
> Although I'm a long time Dark Time owner I noticed some strange behaviour.
>
> When in 1-8 Combi Mode and the lower part is set to Velocity
> there's no gate output at 'Gate 2 Out'.
> In Auto Save mode the Clock Divider is not saved correctly. When
> set to e.g. '1/4T' it is saved as '1/16.' so one clock setting slower.
> Currently I'm using Firmware version
> 'darktime_V1.20_fw_c_131107'. As far as I know this is the latest version?
>
>
> Best regards,
> Karel.
>
>
>
>
>
>
>
>
>