Doepfer

Hello,

I'm sorry about the problems with the module. I cannot remember that we ever
had a similar problem. The LED should not blink unless an external CV (e.g.
from an LFO) is applied. I suppose that the module has to be repaired and
follow the repair notes on the FAQ page of our website:

www.doepfer.com > English > FAQ > General > Repair procedure

If you are familiar with electronics the DIY repair notes may help:

www.doepfer.com > English > FAQ > A-100 > DIY repair tips

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Sonntag, 16. Juli 2017 19:09
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] A-134-1 problem
>
> Since today, when I start-up my system there's one 134-1 with a strange
behaviour.
> When the module starts up the two leds are blinking, and they
> will go blinking faster and faster until both keep lit. When I
> turn the panning-pot, nothing happens, they both keep lit, as
> connected to a LFO....nothing....
> Anyone any idea???
> Cheers and thanks,
> Danny