Doepfer

Me too once I believed this way, though frankly it seems that modular synthesis fellows usually keep themselves far away from the MIDI world… it shouldn’t be too hard to find someone available for mounting it for you. I ignored the existence of the MTV16 and might be interested in having one (assembled) for me !
Best, Diego


> Il giorno 22 set 2017, alle ore 14:01, Malte Stamm-Gadow m.stamm-gadow@innamorati.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> ha scritto:
> 
> Hello Dieter,
> 
> 
> I think, there are many musicians like me out there, who will like a modul to convert Midi-CCs into CV and who are no diy-guys. 
> 
> Greetings,
> Malte
> 
> Malte Stamm-Gadow
> Diekmissen 5
> 
> 24159 Kiel
> 
> 
> Am 22.09.2017 um 13:53 schrieb yahoo@doepfer.de <mailto:yahoo@doepfer.de> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>>:
> 
>> We have such a device available as a DIY product (MTV16) but not as module.
>> It's easy for a DIYer to mount the MTV16 board behind a front panel with 16
>> sockets and wire the 16 sockets to the MTV16. And the MTV16 could be powered
>> by the +12V of the A-100 bus. I'm not sure if there are sufficient inquiries
>> to justify the "conversion" of the MTV16 into a module.
>> 
>> Best wishes
>> Dieter Doepfer
>> 
>> 
>>> -----Ursprüngliche Nachricht-----
>>> Von: Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com> [mailto:Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>]
>>> Gesendet: Freitag, 22. September 2017 12:41
>>> An: Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>
>>> Betreff: [Doepfer_a100] Suggestion: Simple+cheap multiple MIDI CC to CV
>>> converter
>>> 
>>> 
>>> Hello.
>>> 
>>> I have a module suggestion: a simple cheap module that converts
>>> multiple MIDI control change messages into multiple control voltages.
>>> 
>>> AFAIK, the simple and cheap MIDI-CV converters (like A-190-4) don't
>>> support many CCs, only velocity + one controller. Only expensive
>>> converters support multiple CCs.
>>> 
>>> I don't understand electronics, but I guess it wouldn't cost too much
>>> to just skip note ons and concentrate on a set of CCs and output them
>>> as voltages. To keep costs down, the MIDI channel and controller
>>> numbers could be hard-coded. This way no user interface would be
>>> needed.
>>> 
>>> Or, if it doesn't cost much, maybe a switch for MIDI channel can be
>>> added. But the controllers can be any predefined set, because
>>> computers and their software can easily accommodate to that.
>>> 
>>> Maybe it would be nice to support both 7 and 14 bit controllers, but
>>> if not, 14 bits would be better, for accuracy of the values rather
>>> than speed of change.
>>> 
>>> If anybody, Doepfer would be the company to achieve this, right? :)
>>> 
>>> - Ville Oikarinen
>>> 
>>> 
>>> ------------------------------------
>>> Posted by: Ville Oikarinen <ville@oikarinen.org <mailto:ville@oikarinen.org>>
>>> ------------------------------------
>>> 
>>> 
>>> ------------------------------------
>>> 
>>> Yahoo Groups Links
>>> 
>>> 
>>> 
>> 
>> 
>> 
>> ------------------------------------
>> 
>> ------------------------------------
>> 
>> 
>> ------------------------------------
>> 
>> Yahoo Groups Links
>> 
>> 
>> 
> 
> 
>