Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Problem with A-190-4

2018-08-06 by Diego Ragnini

The interplay among the korg SQ-1, the A-190-4 and eventually a PC is not clear to me 
Can the korg SQ-1 sequencer actually send MIDI via USB to the PC and so to the A-190-4?
Maybe you can forward precisions of your hw configuration

I had a similar problem long ago interfacing OSX 10.6.8 with the A-190-4, so the master keyboard actually sent messages but the A-190-4 wasn’t detected by the MIDI Audio setup sometimes (have to keep the A-190-4 powered on before powering on the Mac). But if your DAW sends clock to A-190-4 (but not MIDI notes!?) then it’s not the case..
Diego



> Il giorno 06 ago 2018, alle ore 13:52, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> ha scritto:
> 
> Hello,
> 
> if the clock is working the midi connection is working in principle. Please
> check if the midi channel and note range of the transmitter corresponds to
> the settings of the A-190-4. And make sure that the required note messages
> are really sent by the midi transmitter.
> 
> Best wishes
> Dieter Doepfer
> 
>> -----Ursprüngliche Nachricht-----
>> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
>> Gesendet: Montag, 6. August 2018 13:01
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: [Doepfer_a100] Problem with A-190-4
>> 
>> Hi All,
>> 
>> 
>> I am having a problem with my A-190-4 today and I'm hoping
>> someone may be able to assist.  My A-190 does not appear to be
>> processing CV or Gate signal.  I have tried sending signal from a
>> midi keyboard and from a korg SQ-1 sequencer but no CV or gate
>> signal is produced.  I do get a clock signal when the sequencer
>> is attached.  I have tried to different midi cables also just to
>> rule out a bad cable issue.
>> 
>> 
>> I can scroll through the menu on the A-190 so the module does not
>> appear to be frozen.
>> 
>> 
>> All connections are made using the midi in port, not USB.
>> 
>> 
>> Would anyone have advice on how to troubleshoot this problem?
>> 
>> 
>> Thanks,
>> Colum
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.