Doepfer

It depends upon your PC hard/software if the incoming note on/off data from
the SQ-1 are routed to the Midi output which is connected to the A-190-4.

You may use also the midi output of the SQ-1 (with the special midi adapter
that comes with the SQ-1) to find out if the midi communication between SQ-1
and A-190-4 is working in principle. Pay attention that the midi channels of
both devices are the same !

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Montag, 6. August 2018 15:17
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] Problem with A-190-4

>
>
> The interplay among the korg SQ-1, the A-190-4 and eventually a
> PC is not clear to me
> Can the korg SQ-1 sequencer actually send MIDI via USB to the PC
> and so to the A-190-4?
> Maybe you can forward precisions of your hw configuration
>
> I had a similar problem long ago interfacing OSX 10.6.8 with the
> A-190-4, so the master keyboard actually sent messages but the
> A-190-4 wasn’t detected by the MIDI Audio setup sometimes (have
> to keep the A-190-4 powered on before powering on the Mac). But
> if your DAW sends clock to A-190-4 (but not MIDI notes!?) then
> it’s not the case..
> Diego
>
>
>
> > Il giorno 06 ago 2018, alle ore 13:52, yahoo@doepfer.de
> [Doepfer_a100] <Doepfer_a100@yahoogroups.com> ha scritto:
> >
> > Hello,
> >
> > if the clock is working the midi connection is working in
> principle. Please
> > check if the midi channel and note range of the transmitter
> corresponds to
> > the settings of the A-190-4. And make sure that the required
> note messages
> > are really sent by the midi transmitter.
> >
> > Best wishes
> > Dieter Doepfer
> >
> >> -----Ursprüngliche Nachricht-----

> >> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> >> Gesendet: Montag, 6. August 2018 13:01
> >> An: Doepfer_a100@yahoogroups.com
> >> Betreff: [Doepfer_a100] Problem with A-190-4
> >>
> >> Hi All,
> >>
> >>
> >> I am having a problem with my A-190-4 today and I'm hoping
> >> someone may be able to assist. My A-190 does not appear to be
> >> processing CV or Gate signal. I have tried sending signal from a
> >> midi keyboard and from a korg SQ-1 sequencer but no CV or gate
> >> signal is produced. I do get a clock signal when the sequencer
> >> is attached. I have tried to different midi cables also just to
> >> rule out a bad cable issue.
> >>
> >>
> >> I can scroll through the menu on the A-190 so the module does not
> >> appear to be frozen.
> >>
> >>
> >> All connections are made using the midi in port, not USB.
> >>
> >>
> >> Would anyone have advice on how to troubleshoot this problem?
> >>
> >>
> >> Thanks,
> >> Colum
> >
> >
> >
> > ------------------------------------
> >
> > ------------------------------------
> >
> >
> > ------------------------------------
> >
> > Yahoo Groups Links
> >
> >
> >
>
>
>
> ------------------------------------
> Posted by: Diego Ragnini <diegora@free.fr>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)

<*> To change settings via email:
Doepfer_a100-digest@yahoogroups.com
Doepfer_a100-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Doepfer_a100-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/