Doepfer

Hello,

in the A-135-2 only the audio inputs can be normalled via jumpers. Because
of the very compact design there was no space left on the pc board for the
CV normalling jumpers. We discussed if we add the CV normalling features
without jumpers (i.e. permanent normalling). But in the past we had problems
with fixed normalling because some customers complained that the module is
faulty as they were not aware of the normalling or did not understand this
feature.
But it's very easy to add the CV normalling by means of 3 short wires that
connect the corresponding terminals of the sockets. In the technical
document of the A-135-2 we will explain that.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Mittwoch, 14. November 2018 20:11
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] A135-2 Quad VCA / Voltage Controller Mixer
>
> Hello, I would like to ask a question about the forthcoming A135-2!
> Are the CV inputs going to be normalled just as the signal inputs?
> I ask this because in A135-1 both CV and signal inputs are normalled.
>
> Posted by: exakoustidismiltiadis@hotmail.com