Doepfer

The A-174 joystick makes a handy CV source too, using just 
the 'offset' knob  - gives out about +/-4V on both channels.

Tim

--- In Doepfer_a100@yahoogroups.com, "studio1dk <keldsorensen@m...>" 
<keldsorensen@m...> wrote:
> Which makes me think that, maybe the voltage source (A-176) should 
> have a negative output instead of the cv-3. -Would be a lot easier.
> 
> Keld
> > 
> > You can make the A110 go lower
> > than you expect.  Freeze the clock
> > sequencer at any stage, patch that
> > stage into an inverter.  Take the 
> > output of the inverter and patch it 
> > into one of the cv inputs on the A110. 
> > You can get down to decent lfo levels 
> > that way.
> > 
> > I used to make my VCLFOs that way 
> > until I purchased an A147.
> > 
> > Ethan