Doepfer

Pretty neat, Ethan. I got my A110 down to about 0.5Hz with the CV 
source patched thru the inverter.

The A147 VC LFO, OTOH, goes down to about 1 cycle per MINUTE by 
itself. Patch the same negative voltage to it, and you can use it to 
time paint drying.

Joe

--- In Doepfer_a100@yahoogroups.com, "ethanzer0 <ethanzer0@y...>" 
<ethanzer0@y...> wrote:
> You can make the A110 go lower
> than you expect.  Freeze the clock
> sequencer at any stage, patch that
> stage into an inverter.  Take the 
> output of the inverter and patch it 
> into one of the cv inputs on the A110. 
> You can get down to decent lfo levels 
> that way.
> 
> I used to make my VCLFOs that way 
> until I purchased an A147.
> 
> Ethan