Doepfer

Hi Bakis 

> doepfer should manufacture the touch
> sensor keyboard with all the a154 features included
> AND the a154 module to enable all the a155 users out
> there to greatly enhance their a155 features!!!
I think, the solution might be a standardized digital bus for sequencer
orientated modules. Accessible from the front side of the modules. 10 pins
should be enough for a 5Bit-addressing (=32 Steps), clock, start/stop,
reset and ground and +5V. Doepfer could use the same ribbon cable that is
used for the supply voltages.

If such a bus exists, modules and keyboards simply could be combined.

Florian