Doepfer

> ----- Original Message ----- 
> From: Dieter Doepfer 
> To: Bakis Sirros 
> Sent: Tuesday, February 04, 2003 6:50 PM
> Subject: AW: A154 POLL!!!!
> 
> 
> 
>   -----Urspr�ngliche Nachricht-----
>   Von: Bakis Sirros [mailto:syrros@ath.forthnet.gr]
>   Gesendet am: Dienstag, 4. Februar 2003 11:54
>   An: dieter doepfer
>   Betreff: A154 POLL!!!!
> 
>   hi dieter,
>   i don't know if you have noticed, but the a154
> poll so far(only one day after it's
> creation!!!!)are:
>   YES:20 votes
>   MAYBE:0 votes
>   NO:0 votes
>   so,what do you say?????? ;-)
>   bakis.
> Dear Bakis,
> 
> OK. You convinced me. I'm 99% sure that we will
> built the A-154. But there are still some new
> questions after the NAMM. Some visitors recommended
> we should introduce voltage control of the first and
> last step of the sequence too (so far only included
> in the TKB). This would require additional controls
> and inputs (4 controls and 2 inputs) and increase
> the price and the module width. And another question
> arised: should the internal clock oscillator stop
> when the sequence stops or continue independent of
> the start/stop state of the sequencer (like an
> external LFO used to trigger the sequencer). And
> would it make sense to introduce a 32 steps mode too
> (toggle switch with 3 positions: 8/16/32). Does not
> make sense from my point of view as this would
> require four A-155 but some customers asked for.
> 
> And: We will never manufacture a keyboard (or any
> other device) with a plastic case. The keyboards
> (TKB and "normal" keyboard) will have probably steel
> cases with silver-grey lacquer. I have seen and
> tested a lot of low cost MIDI controllers and short
> keyboards (e.g. 2 octaves) with plastic cases and I
> hate them. We have a little bit problems with the
> sales of our pocket devices (Pocket
> Control/Fader/Dial) as they are built into stable
> steel cases and therefore a little bit more
> expansive than other competitors that use plastic
> cases and poor quality potentiometers, faders or
> buttons. As long as I have the final say in our
> company we will never use plastic boxes for our
> devices. 
> Best wishes
> Dieter Doepfer
> Doepfer Musikelektronik GmbH
> http://www.doepfer.de
> email: hardware@doepfer.de 
 

AND NOW MY OPINION ,ABOUT THE A154 FEATURES:VC OF
FIRST AND LAST  SEQUENCE STEP WOULD BE GREAT!!!(THE
MORE OPTIONS AND CONTROLS THE BETTER!). ABOUT THE FREE
RUNNING SEQUENCER CLOCK...WHY NOT?.ABOUT THE 32
STEPS....IT MAY BE TOO MUCH TO HAVE 4 A155'S LINKED
TOGETHER......
PLEASE LIST MEMBERS,HAVE YOUR SAY!
BAKIS.





 
 
 
 
 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com