Doepfer

Hi Florian, I agree with you on the digital buss. I mentioned it in 
the tkb poll on how it would able to control several sequencer 
modules like the sh101 style sequencer module for instance. However, 
I would rather see a trunk line module to bring buss outlets from the 
TKB to a front panel like a reverse mult. 1 or 2 inputs on the front 
panel and 2 to 4 connectors per input on the back for the sequencer 
modules. this would create a much tidier front panel area than having 
ribbon cables all over. it might suffocate an already tight 
environment. 

regards,
RM


--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@c...> wrote:
> Hi Bakis 
> 
> > doepfer should manufacture the touch
> > sensor keyboard with all the a154 features included
> > AND the a154 module to enable all the a155 users out
> > there to greatly enhance their a155 features!!!
> I think, the solution might be a standardized digital bus for 
sequencer
> orientated modules. Accessible from the front side of the modules. 
10 pins
> should be enough for a 5Bit-addressing (=32 Steps), clock, 
start/stop,
> reset and ground and +5V. Doepfer could use the same ribbon cable 
that is
> used for the supply voltages.
> 
> If such a bus exists, modules and keyboards simply could be 
combined.
> 
> Florian