Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] good news about the mods from Bakis.

2003-03-31 by Bakis Sirros

very good idea andreas,i agree!
bakis.


--- Andreas Lindholm <andreas.k.lindholm@telia.com>
wrote:
> Very nice news indeed. Not that I would dare to mess
> around with a solder
> that much myself, but I think a wast number of mods
> like suggested here
> would indeed give Doepfer as a brand great goodwill.
> Personally I wonder if
> if would be possible to add modified versions to the
> choice that is up for
> sale. I mean if we can have with blue leds why not
> also have these mods up
> for a small fee. (audio enabled a129/3 extra xx
> bucks). ?
> 
> 
> ----- Original Message -----
> From: "Bakis Sirros" <synth_freak_2000@yahoo.com>
> To: "Doepfer_a100 group"
> <doepfer_a100@yahoogroups.com>
> Sent: Monday, March 31, 2003 6:19 PM
> Subject: Fwd: AW: [Doepfer_a100]Sort of OT:Inverting
> Attenuator(DOEPFER'S
> INFO ON DIY PAGE)
> 
> 
> >
> > --- Dieter Doepfer <hardware@doepfer.de> wrote:
> > > From: "Dieter Doepfer" <hardware@doepfer.de>
> > > To: "Bakis Sirros" <synth_freak_2000@yahoo.com>
> > > Subject: AW: [Doepfer_a100] Re: Sort of OT:
> > > Inverting Attenuator - New Cynthia module
> > > Date: Mon, 31 Mar 2003 16:47:30 +0200
> > >
> > > > hello bakis,
> > > >
> > > > yes but the a129/3 can't handle audio signals
> and
> > > > a dedicated offset module would.
> > > >
> > > > or maybe we can modify an a129/3 and switch
> out
> > > the
> > > > slew limiter component? anybody who can check
> > > this?
> > > >
> > > > best wishes
> > > >
> > > > self oscillate
> > >
> > > No problem. We could add this modification to
> the
> > > DIY page. One simply has to
> > > remove the 5 capacitors C1, C3, C5, C7 and C9
> (one
> > > for each of the 5 units) and
> > > leave the slew control input open.
> > >
> > > If there are more ideas for modifications we
> could
> > > add them all to the DIY page.
> > > So far these mods are planned:
> > >
> > > Adding offset function to A-138a/b mixers
> > > Changing input sensitivities for audio or CV
> inputs,
> > > could be used for almost
> > > all modules
> > > Changing output levels, including the increase
> of
> > > amplification (i.e. max.
> > > amplification >1 e.g. for VCAs, mixers and so
> on),
> > > could be used for almost all
> > > modules
> > > Adding reset switch to A-151 (idea by Peter
> > > Grenader)
> > > Adding a reset input to A-163 (will require a
> new
> > > PIC as the current software
> > > does not support the reset feature)
> > > Changing time range for A-162 (e.g. two
> different
> > > time ranges for upper and
> > > lower trigger delay)
> > > Adding controls at the front panel for
> oscillator
> > > frequencies of A-117 (2 osc/6
> > > osc output)
> > > Changing between DC and AC coupling of audio or
> CV
> > > signals
> > > Additional audio or control inputs, could be
> used
> > > for almost all modules
> > > Adding single audio outputs (e.g. for Trautonium
> > > filter A-104 or filter bank
> > > A-128 or Vocoder A-129/1 or /2)
> > >
> > > to be continued ....
> > >
> > >
> > > Dieter Doepfer
> > >
> > >
> > >
> > >
> >
> >
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > [Doepfer_a100] group owner-moderator
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> live on your desktop!
> > http://platinum.yahoo.com
> >
> >
> > To unsubscribe from this group, send an email to:
> > doepfer_a100-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> 
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.