Doepfer

I make a few modules, usually from PCB's supplied by Oakley Sound, EFM
etc.
 
On the panel side I strongly suggest members investigate a company that
Oakley use (as do a lot of MOTM format users).
 
http://www.schaeffer-apparatebau.de/
 
Schaeffer provide an excellent service. They supply you with a graphics
package (downloadable from their site) and a utility to work out cost
(so you can modify it if  it's too expensive) and they will make the
panel, drilled, lettered to your spec (even one off's).
 
Highly recommended.
 
Have a look at www.oakleysound.co.uk to see finished examples/
 
regards
 
 

David Salter 
Reuters Consulting 
Tel: +44 20 7542 2402 
Mob: +44 7990562402 
Fax: +44 20 7542 2699 

	-----Original Message-----
	From: code_pig [mailto:code_pig@yahoo.com] 
	Sent: 01 April 2003 00:02
	To: Doepfer_a100@yahoogroups.com
	Subject: [Doepfer_a100] Re: The most advanced Attenuator yet
	
	
	I very much like the module Andreas put in the files section,
but it 
	still would be nice to have a simple dual attenuator/offset
module.  
	It'd be cheap to produce, and I know I'd get at least 4 of them.
	
	As for the DIY section, I really like the DIY approach, and have

	built a wide variety of vodoo boxes.  The only problem is front 
	panels.  They aren't cheap to have made professionally (and even

	then there are consistency issues), and when one makes their own

	they generally look frightening.
	
	I know before even continuing that this probably won't fly,
but...
	
	Is there any chance that Doepfer would sell pre-punched (even 
	printed maybe?) front panels, jack sockets, PCB mounted pots,
and 
	knobs?  That would allow any DIY'er to match a project's look
and 
	feel with their existing Doepfer modules?
	
	Just a thought.
	
	Regards,
	Kevin
	
	
	--- In Doepfer_a100@yahoogroups.com, "Joe Buechler" 
	<buechlerjoe@t...> wrote:
	> I think there should be a general-purpose voltmeter module 
	instead. 
	> Come to think of it, that's another DIY module, isn't it?
	> 
	> Joe
	> --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" 
	> <andreas.k.lindholm@t...> wrote:
	> > I was fiddling around with tuning my vcos and thinking about
how 
	> good it
	> > would be to have a great attenuator and suddenly it struck
me 
	that 
	> what I
	> > really want is an attenuator that DISPLAYs what I am doing.
	> > 
	> > So I changed the attenuator sketch I had and put in a simple
LCD
	(or 
	> what
	> > ever suits best) that should show the voltage that the
module 
	either
	> > recieves at the IN or the CV(in) or the the Signal Outs. 
	Wouldn't 
	> that be
	> > great? One module that would rid us of voltmeters and also
give 
	us 
	> good
	> > control over or cv signals. Wonder if it would become
expensive 
	to 
	> make?
	> > Hope not cause this would be a dream to have for me atleast.

	Check 
	> it out in
	> > the files section.
	> > 
	> > I also changed the name to VC-CONTROL cause that is more
what it 
	is 
	>  I think
	> > ;)
	> > 
	> > this is the file called a137v2.gif in files.
	> > 
	> > /Andreas
	
	
	
Yahoo! Groups Sponsor	
ADVERTISEMENT
 
<http://rd.yahoo.com/M=246920.2960106.4328965.1728375/D=egroupweb/S=1705
032144:HM/A=1513704/R=0/*http://www.gotomypc.com/u/tr/yh/cpm/grp/300_02F
/g22lp?Target=mm/g22lp.tmpl> 	
 
<http://us.adserver.yahoo.com/l?M=246920.2960106.4328965.1728375/D=egrou
pmail/S=:HM/A=1513704/rand=275030968> 	

	To unsubscribe from this group, send an email to:
	doepfer_a100-unsubscribe@yahoogroups.com
	
	
	
	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 
	



--------------------------------------------------------------- -
        Visit our Internet site at http://www.reuters.com

Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.



[Non-text portions of this message have been removed]