RE: [Doepfer_a100] Re: The most advanced Attenuator yet
2003-04-01 by David Salter
I make a few modules, usually from PCB's supplied by Oakley Sound, EFM etc. On the panel side I strongly suggest members investigate a company that Oakley use (as do a lot of MOTM format users). http://www.schaeffer-apparatebau.de/ Schaeffer provide an excellent service. They supply you with a graphics package (downloadable from their site) and a utility to work out cost (so you can modify it if it's too expensive) and they will make the panel, drilled, lettered to your spec (even one off's). Highly recommended. Have a look at www.oakleysound.co.uk to see finished examples/ regards David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699
Show quoted textHide quoted text
-----Original Message-----
From: code_pig [mailto:code_pig@yahoo.com]
Sent: 01 April 2003 00:02
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Re: The most advanced Attenuator yet
I very much like the module Andreas put in the files section,
but it
still would be nice to have a simple dual attenuator/offset
module.
It'd be cheap to produce, and I know I'd get at least 4 of them.
As for the DIY section, I really like the DIY approach, and have
built a wide variety of vodoo boxes. The only problem is front
panels. They aren't cheap to have made professionally (and even
then there are consistency issues), and when one makes their own
they generally look frightening.
I know before even continuing that this probably won't fly,
but...
Is there any chance that Doepfer would sell pre-punched (even
printed maybe?) front panels, jack sockets, PCB mounted pots,
and
knobs? That would allow any DIY'er to match a project's look
and
feel with their existing Doepfer modules?
Just a thought.
Regards,
Kevin
--- In Doepfer_a100@yahoogroups.com, "Joe Buechler"
<buechlerjoe@t...> wrote:
> I think there should be a general-purpose voltmeter module
instead.
> Come to think of it, that's another DIY module, isn't it?
>
> Joe
> --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm"
> <andreas.k.lindholm@t...> wrote:
> > I was fiddling around with tuning my vcos and thinking about
how
> good it
> > would be to have a great attenuator and suddenly it struck
me
that
> what I
> > really want is an attenuator that DISPLAYs what I am doing.
> >
> > So I changed the attenuator sketch I had and put in a simple
LCD
(or
> what
> > ever suits best) that should show the voltage that the
module
either
> > recieves at the IN or the CV(in) or the the Signal Outs.
Wouldn't
> that be
> > great? One module that would rid us of voltmeters and also
give
us
> good
> > control over or cv signals. Wonder if it would become
expensive
to
> make?
> > Hope not cause this would be a dream to have for me atleast.
Check
> it out in
> > the files section.
> >
> > I also changed the name to VC-CONTROL cause that is more
what it
is
> I think
> > ;)
> >
> > this is the file called a137v2.gif in files.
> >
> > /Andreas
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=246920.2960106.4328965.1728375/D=egroupweb/S=1705
032144:HM/A=1513704/R=0/*http://www.gotomypc.com/u/tr/yh/cpm/grp/300_02F
/g22lp?Target=mm/g22lp.tmpl>
<http://us.adserver.yahoo.com/l?M=246920.2960106.4328965.1728375/D=egrou
pmail/S=:HM/A=1513704/rand=275030968>
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
--------------------------------------------------------------- -
Visit our Internet site at http://www.reuters.com
Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.
[Non-text portions of this message have been removed]