-----Original Message-----
From: code_pig [mailto:code_pig@yahoo.com]
Sent: 01 April 2003 13:24
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Re: The most advanced Attenuator yet
David,
I am aware of Shaeffer, and they do very nice work indeed. That
said, I'm in the US these days, and the cost... you know where
I'm
going with this, so never mind.
By the way, how do you like the EFM stuff compared with Oakley?
Regards,
Kevin
--- In Doepfer_a100@yahoogroups.com, David Salter
<david.salter@r...> wrote:
> I make a few modules, usually from PCB's supplied by Oakley
Sound,
EFM
> etc.
>
> On the panel side I strongly suggest members investigate a
company
that
> Oakley use (as do a lot of MOTM format users).
>
> http://www.schaeffer-apparatebau.de/
>
> Schaeffer provide an excellent service. They supply you with a
graphics
> package (downloadable from their site) and a utility to work
out
cost
> (so you can modify it if it's too expensive) and they will
make
the
> panel, drilled, lettered to your spec (even one off's).
>
> Highly recommended.
>
> Have a look at www.oakleysound.co.uk to see finished examples/
>
> regards
>
>
>
> David Salter
> Reuters Consulting
> Tel: +44 20 7542 2402
> Mob: +44 7990562402
> Fax: +44 20 7542 2699
>
> -----Original Message-----
> From: code_pig [mailto:code_pig@y...]
> Sent: 01 April 2003 00:02
> To: Doepfer_a100@yahoogroups.com
> Subject: [Doepfer_a100] Re: The most advanced Attenuator
yet
>
>
> I very much like the module Andreas put in the files
section,
> but it
> still would be nice to have a simple dual
attenuator/offset
> module.
> It'd be cheap to produce, and I know I'd get at least 4
of
them.
>
> As for the DIY section, I really like the DIY approach,
and
have
>
> built a wide variety of vodoo boxes. The only problem
is
front
> panels. They aren't cheap to have made professionally
(and
even
>
> then there are consistency issues), and when one makes
their
own
>
> they generally look frightening.
>
> I know before even continuing that this probably won't
fly,
> but...
>
> Is there any chance that Doepfer would sell pre-punched
(even
> printed maybe?) front panels, jack sockets, PCB mounted
pots,
> and
> knobs? That would allow any DIY'er to match a project's
look
> and
> feel with their existing Doepfer modules?
>
> Just a thought.
>
> Regards,
> Kevin
>
>
> --- In Doepfer_a100@yahoogroups.com, "Joe Buechler"
> <buechlerjoe@t...> wrote:
> > I think there should be a general-purpose voltmeter
module
> instead.
> > Come to think of it, that's another DIY module, isn't
it?
> >
> > Joe
> > --- In Doepfer_a100@yahoogroups.com, "Andreas
Lindholm"
> > <andreas.k.lindholm@t...> wrote:
> > > I was fiddling around with tuning my vcos and
thinking
about
> how
> > good it
> > > would be to have a great attenuator and suddenly it
struck
> me
> that
> > what I
> > > really want is an attenuator that DISPLAYs what I am
doing.
> > >
> > > So I changed the attenuator sketch I had and put in
a
simple
> LCD
> (or
> > what
> > > ever suits best) that should show the voltage that
the
> module
> either
> > > recieves at the IN or the CV(in) or the the Signal
Outs.
> Wouldn't
> > that be
> > > great? One module that would rid us of voltmeters
and
also
> give
> us
> > good
> > > control over or cv signals. Wonder if it would
become
> expensive
> to
> > make?
> > > Hope not cause this would be a dream to have for me
atleast.
>
> Check
> > it out in
> > > the files section.
> > >
> > > I also changed the name to VC-CONTROL cause that is
more
> what it
> is
> > I think
> > > ;)
> > >
> > > this is the file called a137v2.gif in files.
> > >
> > > /Andreas
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=246920.2960106.4328965.1728375/D=egroupweb/S=1
705
>
032144:HM/A=1513704/R=0/*http://www.gotomypc.com/u/tr/yh/cpm/grp/300_
02F
> /g22lp?Target=mm/g22lp.tmpl>
>
> <http://us.adserver.yahoo.com/l?
M=246920.2960106.4328965.1728375/D=egrou
> pmail/S=:HM/A=1513704/rand=275030968>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
>
>
>
--------------------------------------------------------------- -
> Visit our Internet site at http://www.reuters.com
>
> Get closer to the financial markets with Reuters Messaging -
for
more
> information and to register, visit
http://www.reuters.com/messaging
>
> Any views expressed in this message are those of the
individual
> sender, except where the sender specifically states them to
be
> the views of Reuters Ltd.
>
>
>
> [Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=245454.3115308.4434529.1728375/D=egroupweb/S=1705
032144:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>
<http://us.adserver.yahoo.com/l?M=245454.3115308.4434529.1728375/D=egrou
pmail/S=:HM/A=1457554/rand=558408686>
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
-------------------------------------------------------------- --
Visit our Internet site at http://www.reuters.com
Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.
[Non-text portions of this message have been removed]