Doepfer

Hi 

> What do people think of the blank panel idea?  
Doepfer already offers Blankpanels with the whole for the screws
(A100B1/2/4/8), but without wholes for jacks or pots. I would always use
those for selfmade modules, since the position of switches, pots and jacks
will always depend on my circuit layout. Due to the fact I use breadboard
pcbs I cannot place always a pot or jack to where the frontplate would urge
me.

For my usage there are also two other arguments against the
5jack5pots-idea:

I create modules, that offer several jacks for one output or a feedthrujack
for each input, so I do not need 5 pots, but e.g. 3 jacks in one horizontal
line at the bottom of the frontplate for the output.

Also the most easy (!) diy projects should be digital modules, that do
require only a few pots but a lot of jacks.


And last but not least:

People who are able to solder an electronic circuit and add the pcb to the
frontplate mechanically should be able to drill a whole in the frontplate -
it is not that complicated.



So I would not buy one.

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de