Doepfer

Me too.  I'd like that's backlit.  I think one shoud have at least 2.

Regards,
Kevin

--- In Doepfer_a100@yahoogroups.com, "selfoscillate" 
<synaptic_music@y...> wrote:
> 
> hello bakis,
> 
> yes, you are right ;-)
> i would also prefer a doepfer-meter.
> 
> best wishes
> 
> self oscillate
> 
> p.s. by the way, how do you like the technosaurus?
>      does it really sound that good compared to other modulars?
>      i never gave it a try because i find it is too expensive.
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
> <synth_freak_2000@y...> wrote:
> > hi self-osc,
> > no!.the doepfer A1?? vu-meter should be the best
> > choise ;-)
> > bakis.
> > 
> > 
> > --- selfoscillate <synaptic_music@y...> wrote:
> > > 
> > > the analogue solutions vu-meter isn't available
> > > anymore.
> > > the analogue systems vu-meter should be a better
> > > choice.
> > > 
> > > best wishes
> > > 
> > > self oscillate
> > > 
> > > 
> > > --- In Doepfer_a100@yahoogroups.com, "unknown freak"
> > > <cgraef@n...> 
> > > wrote:
> > > > Have you considered getting Analogue Solutions' VU
> > > module?  It 
> > > would blend
> > > > right into your rack.
> > > > 
> > > > > -----Original Message-----
> > > > > From: Bakis Sirros
> > > [mailto:synth_freak_2000@y...]
> > > > > Sent: Sunday, May 04, 2003 4:56 PM
> > > > > To: Doepfer_a100@yahoogroups.com
> > > > > Subject: Re: [Doepfer_a100] Re: A-136 CV
> > > question
> > > > >
> > > > >
> > > > > hi list,
> > > > > isn't it sad to try to figure out what's going
> > > on
> > > > > inside the a100 by watching the a170 or a185 or
> > > > > a175...little leds???(btw,i do the
> > > same...).that's why
> > > > > i have always proposed that we need a vu-meter
> > > > > module.so,if you think you need one(like i
> > > do)vote in
> > > > > the vu-meter poll....
> > > > > bakis.
> > > > >
> > > > >
> > > > > --- Joe Buechler <buechlerjoe@t...> wrote:
> > > > > > Timothy, you're not the only one who needs to
> > > > > > correct himself five
> > > > > > minutes after posting :-)
> > > > > >
> > > > > > That's how long it took me, adjusting the
> > > voltage
> > > > > > from an A176 CV
> > > > > > Source, and watching the LEDs on an A170, to
> > > > > > convince myself that the
> > > > > > A136 does indeed process the A, +A, and -A
> > > paths
> > > > > > independently, and
> > > > > > then sums the result. My A132 suggestion was
> > > all
> > > > > > wet.
> > > > > >
> > > > > > If nothing else, I've learned a little bit
> > > more
> > > > > > about the A136 today.
> > > > > >
> > > > > > Joe
> > > > > >
> > > > > > --- In Doepfer_a100@yahoogroups.com, "Joe
> > > Buechler"
> > > > > > <buechlerjoe@t...>
> > > > > > wrote:
> > > > > > > Timothy, the A136 User's manual says that
> > > the
> > > > > > signal is split into
> > > > > > > three parts, but no signal flow diagram is
> > > > > > provided. (This is only
> > > > > > > the least of the problems with the A136
> > > > > > documentation). The
> > > > > > > signal diagram on the module front panel
> > > suggests
> > > > > > that the "A" gain
> > > > > > > is applied BEFORE the signal is fed to the
> > > > > > positive and negative
> > > > > > > clipping circuits. That's why I made the
> > > > > > suggestion that I did.
> > > > > > >
> > > > > > > I suppose I could spend some time
> > > experimenting to
> > > > > > determine the
> > > > > > > actual signal path, but it's a tedious
> > > business
> > > > > > without a scope. I
> > > > > > > wish bakis would nudge Dieter to describe
> > > the A136
> > > > > > signal path, and
> > > > > > > correct all the errors in the User's Guide
> > > while
> > > > > > he's at it.
> > > > > > >
> > > > > > > Joe
> > > > > > >
> > > > > > > --- In Doepfer_a100@yahoogroups.com, "Tim
> > > > > > Stinchcombe"
> > > > > > <timothy@t...>
> > > > > > > wrote:
> > > > > > > > Hi Joe,
> > > > > > > >
> > > > > > > > > If the positive/negative gain isn't an
> > > issue,
> > > > > > couldn't you just
> > > > > > > > route
> > > > > > > > > the audio thru an A132 VCA and get
> > > voltage
> > > > > > control of the gain
> > > > > > > that
> > > > > > > > > way?
> > > > > > > >
> > > > > > > > Internally in the A-136 the signal is
> > > split into
> > > > > > three paths, and
> > > > > > > > the 'A' gain knob affects just one of
> > > these, and
> > > > > > it's the
> > > > > > > interaction
> > > > > > > > of this path with the other two that
> > > produces
> > > > > > all the interesting
> > > > > > > > waveshaping effects. I suspect that doing
> > > what
> > > > > > you suggest just
> > > > > > > > probably wouldn't be so interesting.
> > > > > > > >
> > > > > > > > Tim
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > =====
> > > > > synthfreak(parallel worlds)
> > > > > athens-greece
> > > > > [Doepfer_a100] group owner
> > > > >
> > > > > __________________________________
> > > > > Do you Yahoo!?
> > > > > The New Yahoo! Search - Faster. Easier. Bingo.
> > > > > http://search.yahoo.com
> > > > >
> > > > >
> > > > > To unsubscribe from this group, send an email
> > > to:
> > > > > doepfer_a100-unsubscribe@yahoogroups.com
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to 
> > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > > 
> > > 
> > 
> > 
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > [Doepfer_a100] group owner
> > 
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com