Doepfer

Design and esthetics are for sure a matter of taste, but not irrelevant. I
prefer digital, but I can go with another display if it works and shows me
what is going on. The LED-bars isn't a bad idea since it reminds us of out
mixers, but terribly accurate it is not. I would like to know if the midi-cv
puts out a clean one volt per octave or 1.07 or anything else that makes
things go out of tune and such.

A do it youself ugly cheap mutlimetermod is not what I want in my nice A100
setup. But to each his own;)


----- Original Message ----- 
From: "Joe Buechler" <buechlerjoe@toadmail.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Thursday, May 08, 2003 2:59 PM
Subject: [Doepfer_a100] Re: attenuators and vu-meters


> Hi Florian
>
> > Every 3 1/2 digit Multimeter does this: The "half" digit is for
> > displaying the polarity (+/-)
>
> Displaying my ignorance once again! :-)
>
> On the other hand, my brain just isn't wired correctly for
> interpreting digital information. I need to see a geometrical
> presentation, I need to see which direction it's changing, and how
> fast it's changing.
>
> I won't mention the appearance issue again if it bothers you, but I
> suspect that it's a big factor creating interest in a meter module.
>
> As far as the size of the meter, I admit that I have a selfish reason
> for preferring a small one: it would be easier for me to swap out an
> 8HP module to make room for it. But if the meter module appears, I'll
> accomodate it somehow, no matter if it's larger than that.
>
> Joe
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>