Doepfer

Ulrich,

If you attenuate the input to the A136, you will get an undistorted 
waveform.  Here's the settings I use to get a neutral sound:

VCO --> A138 (Input=7, Output=10) --> A136 (+A=0, +L=0, A=5, -L=10, -
A=0).

It should be noted that the A136 uses clipping and amplification to 
modify waveforms, so clipping should be expect with an unattenuated 
input.

Regards,
Kevin


--- In Doepfer_a100@yahoogroups.com, "hellleutel" <hellleutel@y...> 
wrote:
> hi together, 
> 
> this is my first post here, so hi everybody, I'm a germany-based 
film composer, 
> proud of a new small doepfer system. 
> 
> My question's about the 136 distortion/shaping module. I think the 
manual is a 
> bit short about the details. How could I possibly get a kind of 
neutral position 
> to start distorting the source  more consciously; L+ all up L- all 
down and A 
> just a bit above the center position should sound like bypass, 
according to the 
> manual; in fact, in already makes a square out of a sine wave. 
> 
> Thanks for any hints
> 
> ulrich