Doepfer

Wow!  Using the 129/3 worked great!  Thanks for the response!  What a 
great sound... and a new fancy use for the under-utilized 129/3 
(vocoder slew limiter).

- Bret

--- In Doepfer_a100@yahoogroups.com, "c45a6" <clone45@h...> wrote:
> Thanks!
> 
> I'll try using the 129/3 and see what happens!!
> 
> - Bret
> 
> --- In Doepfer_a100@yahoogroups.com, "unknown freak" <cgraef@n...> 
> wrote:
> > The A129/3 could do this, as could a mixer and A-176 CV source 
> combination.
> > 
> > > -----Original Message-----
> > > From: c45a6 [mailto:clone45@h...]
> > > Sent: Sunday, September 21, 2003 2:21 PM
> > > To: Doepfer_a100@yahoogroups.com
> > > Subject: [Doepfer_a100] Strange sequencer question... small cv 
> offsets.
> > >
> > >
> > >
> > > Hello everyone!
> > >
> > > I bought a nifty Analog Solutions delay/samper unit.  Very nice
> > > module.  One of the coolest parts of it is that you can control 
> the
> > > sample start and sample end via CV.
> > >
> > > You can get neat effects by putting the sample playback on 
"loop" 
> and
> > > keeping the sample start very close to the sample end - while 
> sliding
> > > both forward and backward through the sample.  It sounds 
somewhat 
> like
> > > granular synthesis.
> > >
> > > However, it seems rather tricky to control both sample start and 
> end
> > > and keep them both near each other.  I tried using two analog
> > > joysticks, but they weren't subtle enough and it was difficult 
to
> > > control.
> > >
> > > Does anyone know of any module that can take a CV signal and add 
a
> > > very small voltage to it?  That way I could keep the sample end 
> *just
> > > barely* past the sample start.
> > >
> > > Thanks!
> > > - Bret
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > doepfer_a100-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to http://docs.yahoo.
> com/info/terms/
> > >
> > >
> > >