Doepfer

Pierre
I have given this subject a longh thought and arrived at the follwing 
conclusions:
1) one would need a midi-cv interface wich can assign different 
cv/gate channels from a midi source in a "rotating" fashion. I 
believe that the Doepfer MCV 24 , the old MCV8, the roland mpu101, 
the kenton pro4 and the PAIA 9700 can do this but most of them are 
expensive
2) obviosuly at least 4 oscilators, EG's and VCA's are needed (eg the 
A-135 can serve as a quad vca). One filter could do, but for a full 
polyphonic set-up one would need 4 filters.
So this is going to be quite a costly and complex setup.
Alternatively, I have considered the new A.Sol. RS370 module, which 
offers everything hardwired but the filters, but this is also quite a 
costly option.

Anyway, I would love doepfer to repackage their MCV8 in A-100 format 
to get started on this

regards
Joost




--- In Doepfer_a100@yahoogroups.com, "Pierre Zeeman" <pierrezee@h...> 
wrote:
> Hi Ingo
> 
> >my favorite application for the a133 is waveform-conversion
> >of vco's and lfo's. the a133 is the ticket, no matter if you
> >need it to alter audio or cv voltages.
> 
> Wow so much praise for a little module I must confess to having 
ignored thus 
> far.  Hmmm, if I understand you correctly you are actually using 
the a133 to 
> change the shape of an audio waveform - would you be able to do 
> rectification style effects then?
> 
> Also, does anybody use their a100 polyphonically?  Presumably you 
have a 
> have a MIDI-CV controller that can take each note in a chord and 
send it out 
> of a different CV socket, each of which would have to be hardwired 
to an 
> oscillator.  And the same for gate signals.  Is this correct?
> 
> thanks
> 
> Pierre
> 
> _________________________________________________________________
> Access your MSN favourites from anywhere - download MSN Toolbar 
today! 
> http://toolbar.msn.co.za?DI=1054&XAPID=2083