Doepfer

Here is an idea. Why not add a multi-pin header to the current mixers 
that would allow their inputs to be chained to each other. This way you 
could chain as many mixers together as you want to make a 4 by x matrix 
mixer (it could even jumper to adjacent rows to make an 8 by x matrix). 
I would guess this could be done now by wiring cables between the input 
jacks of the current models. A better idea - I have always hoped that 
Doepfer would allow access to the normalizing contacts on all the jacks 
used in the modules (at least the ones the can be used) like the old 
E-mu modular. Currantly most of them are shorted to the main input 
pins. This way you could chain the mixers inputs to each other through 
the normalized part of the jacks and by jacking into a mixer in the 
middle of a matrix, it would function normally. All it needs to be is a 
unused pad or donut - no pins or connectors.

On Dec 10, 2004, at 4:37 AM, Dieter Doepfer wrote:

>
>> -----Ursprüngliche Nachricht-----
>> Von: turbotron69 [mailto:turbotron69@hotmail.com]
>> Gesendet: Freitag, 10. Dezember 2004 07:46
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: [Doepfer_a100] Matrix module again
>>
>>
>>
>>
>> Dear Dieter Skirros;
>>
>> I would like to know if your brand is taking seriously the great
>> matrix  mixer
>> module.I would be able to advance you some money for the research as 
>> that
>> odule could launch your system to a brand new world..
>>
>> I would like to know  it soon as if that module is not going to
>> be released ,my
>> system would have to find another fan other than myself.
>
> This is the answer from the first name (Dieter Doepfer). I don't know 
> who is
> Mr Skirros (maybe you mean Bakis Sirros).
>
> From the technical point of view a matrix mixer is a boring design and 
> only
> a lot of mechanics (and consequently causing high costs as the 
> mechanics is
> usually the costly part of a module (there are exceptions, e.g. A-111 
> or the
> vocoder).
>
> E.g. a 4x4 matrix mixer is nothing but 16 potentiometers mounted to a 
> front
> panel and wired as a matrix. The electronics is nothing but a few low 
> cost
> operational amplifiers. If there are sufficient orders we could 
> develop such
> a module (but the term "develop" is bit exaggerated in this 
> connection). The
> price for a 4x4 matrix mixer would be in the range of about three A-138
> mixers. We could add a circuit of the very easy to built matrix mixer 
> on the
> DIY page.
>
> Best wishes
> Dieter Doepfer
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
James Husted
The ErsatZ Planet Graphics & Sound
james@ersatzplanet.com
www.ersatzplanet.com
------------------------------------------------------------------------
"Welcome to the First day of the rest of your money..."