Doepfer

YES,
I used the standard couple CV OUTPUT1-->TRIGGER OUT on OUTPUT13
I set up:
trigger Level ON =100%
trigger level OFF=000%

...as suggested in the manual

I stil have an inverted output onm OUT13...
If I patch the OUPUT13 in the A-165 Trigger Modifier, then into the A-
140 everything is OK!!!

i don't see any "Inverted Gate" setting in the manual

Looks like my A100 doesn't want to work with MIDI at all...;-)))




--- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@y...> wrote:
> hello antonio,
> i have a mcv24 and use it all the time. the revesre
> gate output is for sure Not the normal setting. maybe
> if you search all the menus will have an option for
> inverted gate? i don't remember at the moment.
> and of course you don't need an inverter for the mcv24
> to output a standard gate signal.
> 
> btw, just to be sure: you use output-1 for cv and
> output-13 for gate (these two are a pair), right?
> bakis.
> 
> 
> 
> 
> --- Antonio Grazioli <antonio_grazioli@f...>
> wrote:
> 
> > 
> > Hi, i recently purchased a MCV 24.
> > 
> > I'm using it conectd to my A100, I connected an old
> > Yamaha DX7 as 
> > keyboard...set it to VOLT/OCTAVE
> > 
> > CV OUT1 is OK, i patched it in a VCO and the VCO
> > tracks CV OK
> > 
> > the problem is with the GATE signal...the interface
> > sends a GATE 
> > Signal each time a key is released, not pressed...
> > 
> > I messed with the manual but i can't manage to find
> > if it's normal 
> > operation or if i can change it from the menus...
> > do i need an inverter or something???
> > 
> > regards,
> > Antonio
> > 
> > 
> > 
> > 
> 
> 
> =====
> Bakis Siros
> Parallel Worlds / Polariton
> Athens-Greece
> [Doepfer_a100] group owner
> http://www.shimarecords.co.uk
> http://www.ward12.com
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Mail - now with 250MB free storage. Learn more.
> http://info.mail.yahoo.com/mail_250