Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: wiard modules in eurorack (was a149-1 vs Wiard Noise Ring)

2005-04-25 by selfoscillate

--- In Doepfer_a100@yahoogroups.com, "Julian" <julian@2...> wrote:
> 
> 
> > Besides the voltage issues (does the noisering work on +/-12 
instead
> > of +/-15 ?)
> 
> They are 12v


wiard/blacet modules are 15v. the noise ring maybe
runs with 12v too, but i'm not sure.


> > btw: A dedicated frackrack from Blacet or PAIA is not very 
expensive,
> > especially not if you consider getting some more modules in this
> > format in the future ....
> 
> 
> I do not plan on any other modules of this format.  The noise ring 
was a gift.  Its not the cost of the frackrack, its the space
> that it takes up.  My setup is simply not suitable to have another 
3u rack shoved in the middle of it for one module.


at the musikmesse in frankfurt i saw small wood racks for
the euro format, suitable for two or three modules, but
without power supply. i think that "schneiders buero"
sells these, maybe these are an alternative.

best wishes

ingo

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.