Doepfer

Ingo,

thank you for the information. We will correct the manual asap.

Dieter

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von selfoscillate
> Gesendet: Donnerstag, 19. Mai 2005 07:52
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: a196 pll patch examples
>
>
>
> hello dieter,
>
> you are right, i apologize for the false information.
> the a196 front panel is absolutely correct.
> but i have a good excuse ;-)
>
> a few days ago i discovered that the lowpass frequency
> knob is still altering the signal output of the pll,
> even when the phase comp output is connected directly
> to the cv input of the vco part. this was surprising,
> i assumed that the lowpass part would be completely
> bypassed in this case. then the question about the
> description of my patch examples came up. while in the
> office, i checked the user manual about it and posted
> my "false information". and that's the problem, the
> user manual is wrong. please check section 3 (overview),
> outputs 5 and 6 are swapped there (on both english and
> german versions).
>
> best wishes
>
> ingo