Doepfer

hi gentlemen-
i played a gig last night, using my suitcase, so i was not able to 
check my PLL (not part of my patch)to determine for sure the 
normalling scheme for myself.  and now i'm running out of my house to 
work.
so, ingo, are you saying that indeed a loop starting and the phase 
comp out and ending at the vco in does NOT bypass the lpf?
--tom

--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" <hardware@d...> 
wrote:
> Ingo,
> 
> thank you for the information. We will correct the manual asap.
> 
> Dieter
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von selfoscillate
> > Gesendet: Donnerstag, 19. Mai 2005 07:52
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Re: a196 pll patch examples
> >
> >
> >
> > hello dieter,
> >
> > you are right, i apologize for the false information.
> > the a196 front panel is absolutely correct.
> > but i have a good excuse ;-)
> >
> > a few days ago i discovered that the lowpass frequency
> > knob is still altering the signal output of the pll,
> > even when the phase comp output is connected directly
> > to the cv input of the vco part. this was surprising,
> > i assumed that the lowpass part would be completely
> > bypassed in this case. then the question about the
> > description of my patch examples came up. while in the
> > office, i checked the user manual about it and posted
> > my "false information". and that's the problem, the
> > user manual is wrong. please check section 3 (overview),
> > outputs 5 and 6 are swapped there (on both english and
> > german versions).
> >
> > best wishes
> >
> > ingo