Doepfer

hello!

>A single bucket bridge is a sample and hold stage with a bad hold value.
>Also there is a signal to noise ratio, which is to my opinion not
>bearable for CVs for VCOs. You could modulate the VCO with white noise
>too...

pitches and tones? no, no

here's what i thought yesterday

///

inputs:

* record gate
* record cv/audio
* play gate
* frequency/rate cv1

knobs:

* frequency/rate
* cv1 amount
(* maybe output amplifier gain, depending on electrical properties and 
design)

outputs:

* audio/cv

///

notes:

* slew limiter is used to smooth the output: time inversely proportional to 
the frequency/rate
* when recording (= a record gate is received and there are bucket bridges 
left to record to) the input is simply passed to the output

///

simple patch:

1 connect a-176 manual cv-source to the bbd-recorder's audio/cv-input
2 connect the output of the bbd-recorder to a filter's cv-input
3 send a gate simultaneously to sequencer start and record gate input of the 
bbd-recorder
4 tweak the filter's cutoff point with a-176 while the sequence lasts
5 now move the cable from the record gate to the play gate
6 when you play the sequence again, you will hear the recorded filter cutoff 
sequence

///

you can freely use my idea, just send me a free copy of the prototype then 
hehehehehe

esa

_________________________________________________________________
Nopea ja hauska tapa lähettää viestejä reaaliaikaisesti - MSN Messenger. 
http://messenger.msn.fi