Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Bakis Sirros
> Gesendet: Sonntag, 5. Juni 2005 11:35
> An: Doepfer_a100 group; Analogue Systems group
> Betreff: Re: [Doepfer_a100] Re: Power ribbon cables
>
>
> hello,
> if i remember well, doepfer rack case have their
> connectors installed is such a way so as the red
> stripe of the ribbon cables to be downwards.
> in the Analogue Solutions cabinets, the doepfer
> connectors in their modules are in such a way
> installed so as the red stripe to face upwards. btw,
> the red stripe for doepfer and analogue SOLUTIONS
> means pin1 and -12volts.
> in the analogue SYSTEMS rack cases, their analogue
> systems connectors have their connectors in such a way
> so as their red stripe to mean 0volts.
> dieter, bob, if i am wrong correct me, ok?
> best regards,
> bakis.

For the A-100 everything is correct. The red stripe marks -12V and has
always to face downwards.
More details are available on our web site:
A-100 Technical details
A-100 Mechanical details
A-100 manual introduction (pdf file A100_intro_e.pdf) in the manuals section

Best wishes
Dieter Doepfer